Okay, here are the directions for making the tray. Let me know if you have any questions and I would be happy to get back to you. Happy crafting!Supplies:
-1 wooden tray, tissue box, keepsake box or other item to decoupage
-Hand written messages (you could use color photos or copies of other original art however I would recommend having them color copied with a non-smudge ink at your local copy store)
-1 large jar Mod Podge (I chose gloss finish)
-1 foam brush
-Colored paper scraps, (I used an assortment of handmade papers ordered from the Oriental Trading Company; if you choose standard colored tissue paper, check to see that it is colorfast, most isn’t)
-A Bone Folder or Flat Popsicle stick
Step 1 -Develop a plan for where to lay out your memorabilia. You can lay them on your tray (with no Mod Podge) to see if they will fit; do any trimming now.
Step 2 -Choose colored paper scraps for your base layer, be sure that they are the size, shapes and colors that you need. You can use lots of smaller ones for a more collaged effect.
Step 3 -Begin adhering the paper to the tray. I generally coat the back of the paper with a thin layer of Mod Podge and lay it on the tray. I press to smooth out any bubbles. A bone folder is helpful in this step; or use my favorite tool: fingers. Repeat this step until you have one surface covered in paper.
Step 4 -Apply a thin layer of Mod Podge over the covered surface. You may see some air bubbles at this point. Use your fingers to smooth them; most of them will resolve when the Mod Podge is dry.
Step 5 -Let the surface dry until no longer wet, it may be slightly tacky to the touch.
Step 6 -Repeat steps 3 – 5 until all the tray surface are covered with paper and sealed. Then adhere the messages or memorabilia in the same way the paper was applied.
Step 7 -When you are satisfied with the look of your item, apply a thin, even layer of Mod Podge over the entire surface. Let dry. Repeat. I would suggest 2 – 3 coats in for an item that may be handled. You can apply multiple layers for a more durable surface.
The Mod Podge will be dry to the touch in a few hours. It will take several days to “cure.” The surface can be cleaned by wiping with a dry or slightly damp (not wet) cloth.
I hope you enjoy this project. I enjoyed making it, and I know the teacher enjoyed receiving it. Let me know if you give it a try!